WTware v.6.0.6/RPi
WTware 6.0.6/RPi supervisor.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Linux version 4.19.118-v7 (aka@c22) (gcc version 8.3.0 (Debian 8.3.0-2)) #18 SMP Sun May 17 11:24:00 UTC 2020
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ KERNEL] [ 0.000000] On node 0 totalpages: 242688
[ KERNEL] [ 0.000000] Normal zone: 1896 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 242688 pages, LIFO batch:63
[ KERNEL] [ 0.000000] random: get_random_bytes called from 0x807009cc with crng_init=0
[ KERNEL] [ 0.000000] percpu: Embedded 15 pages/cpu s29132 r8192 d24116 u61440
[ KERNEL] [ 0.000000] pcpu-alloc: s29132 r8192 d24116 u61440 alloc=15*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240792
[ KERNEL] [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 quiet wtboot=mmc
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 945132K/970752K available (5120K kernel code, 134K rwdata, 604K rodata, 2048K init, 349K bss, 17428K reserved, 8192K cma-reserved)
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
[ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ KERNEL] [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (6112 kB)
[ KERNEL] [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB)
[ KERNEL] [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 135 kB)
[ KERNEL] [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 350 kB)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] rcu: Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ KERNEL] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ KERNEL] [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ KERNEL] [ 0.000016] Switching to timer-based delay loop, resolution 52ns
[ KERNEL] [ 0.000194] Console: colour dummy device 80x30
[ KERNEL] [ 0.000208] console [tty0] enabled
[ KERNEL] [ 0.000246] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ KERNEL] [ 0.000258] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.000411] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.000424] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.001026] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001398] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.001851] Setting up static identity map for 0x100000 - 0x10003c
[ KERNEL] [ 0.001956] rcu: Hierarchical SRCU implementation.
[ KERNEL] [ 0.002508] smp: Bringing up secondary CPUs ...
[ KERNEL] [ 0.003135] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.003817] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004440] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004523] smp: Brought up 1 node, 4 CPUs
[ KERNEL] [ 0.004532] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ KERNEL] [ 0.004536] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004539] CPU: Virtualization extensions available.
[ KERNEL] [ 0.005165] devtmpfs: initialized
[ KERNEL] [ 0.016184] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ KERNEL] [ 0.016531] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.016548] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ KERNEL] [ 0.016977] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.017968] NET: Registered protocol family 16
[ KERNEL] [ 0.020203] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.027612] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.040041] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-04-27 14:35, variant start
[ KERNEL] [ 0.050026] raspberrypi-firmware soc:firmware: Firmware hash is 3a8f1793b758d6fb7f375edaa260e069ecd34c88
[ KERNEL] [ 0.098133] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ KERNEL] [ 0.100605] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.100713] usbcore: registered new interface driver hub
[ KERNEL] [ 0.100801] usbcore: registered new device driver usb
[ KERNEL] [ 0.102507] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.115476] NET: Registered protocol family 2
[ KERNEL] [ 0.116022] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ KERNEL] [ 0.116052] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.116158] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.116343] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.116465] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.116510] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.116680] NET: Registered protocol family 1
[ KERNEL] [ 1.056030] Initialise system trusted keyrings
[ KERNEL] [ 1.056224] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ KERNEL] [ 1.067555] Key type asymmetric registered
[ KERNEL] [ 1.067565] Asymmetric key parser 'x509' registered
[ KERNEL] [ 1.067648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 1.067656] io scheduler noop registered
[ KERNEL] [ 1.067823] io scheduler cfq registered (default)
[ KERNEL] [ 1.070159] bcm2708_fb soc:fb: FB found 1 display(s)
[ KERNEL] [ 1.131981] Console: switching to colour frame buffer device 240x67
[ KERNEL] [ 1.170693] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
[ KERNEL] [ 1.172840] bcm2835-rng 3f104000.rng: hwrng registered
[ KERNEL] [ 1.173183] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ KERNEL] [ 1.174987] vc-sm: Videocore shared memory driver
[ KERNEL] [ 1.175594] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ KERNEL] [ 1.176676] zram: Added device: zram0
[ KERNEL] [ 1.177551] libphy: Fixed MDIO Bus: probed
[ KERNEL] [ 1.177595] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 1.705466] dwc_otg 3f980000.usb: base=(ptrval)
[ KERNEL] [ 1.905703] Core Release: 2.80a
[ KERNEL] [ 1.905712] Setting default values for core params
[ KERNEL] [ 1.905737] Finished setting default values for core params
[ KERNEL] [ 2.106028] Using Buffer DMA mode
[ KERNEL] [ 2.106035] Periodic Transfer Interrupt Enhancement - disabled
[ KERNEL] [ 2.106038] Multiprocessor Interrupt Enhancement - disabled
[ KERNEL] [ 2.106045] OTG VER PARAM: 0, OTG VER FLAG: 0
[ KERNEL] [ 2.106087] Dedicated Tx FIFOs mode
[ KERNEL] [ 2.106815] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = bad14000 dma = 0xfad14000 len=9024
[ KERNEL] [ 2.106843] FIQ FSM acceleration enabled for :
[ KERNEL] [ 2.106843] Non-periodic Split Transactions
[ KERNEL] [ 2.106843] Periodic Split Transactions
[ KERNEL] [ 2.106843] High-Speed Isochronous Endpoints
[ KERNEL] [ 2.106843] Interrupt/Control Split Transaction hack enabled
[ KERNEL] [ 2.106850] dwc_otg: Microframe scheduler enabled
[ KERNEL] [ 2.106900] WARN::hcd_init_fiq:457: FIQ on core 1
[ KERNEL] [ 2.106909] WARN::hcd_init_fiq:458: FIQ ASM at 803b2bfc length 36
[ KERNEL] [ 2.106919] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
[ KERNEL] [ 2.106935] dwc_otg 3f980000.usb: DWC OTG Controller
[ KERNEL] [ 2.106970] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ KERNEL] [ 2.107006] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ KERNEL] [ 2.107054] Init: Port Power? op_state=1
[ KERNEL] [ 2.107059] Init: Power Port (0)
[ KERNEL] [ 2.107242] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ KERNEL] [ 2.107252] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 2.107260] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 2.107268] usb usb1: Manufacturer: Linux 4.19.118-v7 dwc_otg_hcd
[ KERNEL] [ 2.107275] usb usb1: SerialNumber: 3f980000.usb
[ KERNEL] [ 2.107910] hub 1-0:1.0: USB hub found
[ KERNEL] [ 2.107969] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 2.108684] dwc_otg: FIQ enabled
[ KERNEL] [ 2.108696] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 2.108703] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 2.108723] Module dwc_common_port init
[ KERNEL] [ 2.109199] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 2.110111] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ KERNEL] [ 2.110337] bcm2835-cpufreq: min=600000 max=1400000
[ KERNEL] [ 2.110857] sdhci: Secure Digital Host Controller Interface driver
[ KERNEL] [ 2.110865] sdhci: Copyright(c) Pierre Ossman
[ KERNEL] [ 2.111474] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[ KERNEL] [ 2.111916] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ KERNEL] [ 2.112027] sdhci-pltfm: SDHCI platform and OF driver helper
[ KERNEL] [ 2.112108] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 2.112886] usbcore: registered new interface driver usbhid
[ KERNEL] [ 2.112890] usbhid: USB HID core driver
[ KERNEL] [ 2.113788] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ KERNEL] [ 2.115276] [vc_sm_connected_init]: start
[ KERNEL] [ 2.124248] [vc_sm_connected_init]: end - returning 0
[ KERNEL] [ 2.124962] NET: Registered protocol family 17
[ KERNEL] [ 2.125088] Registering SWP/SWPB emulation handler
[ KERNEL] [ 2.125375] Loading compiled-in X.509 certificates
[ KERNEL] [ 2.127453] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 2.127461] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ KERNEL] [ 2.154652] sdhost: log_buf @ (ptrval) (fad13000)
[ KERNEL] [ 2.191598] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 2.193424] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.194971] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.197709] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 2.202535] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ KERNEL] [ 2.202718] of_cfs_init
[ KERNEL] [ 2.202843] of_cfs_init: OK
[ KERNEL] [ 2.206180] Freeing unused kernel memory: 2048K
[ KERNEL] [ 2.261756] mmc0: host does not support reading read-only switch, assuming write-enable
[ KERNEL] [ 2.263674] Run /init as init process
[ KERNEL] [ 2.265113] mmc0: new high speed SDHC card at address 5048
[ KERNEL] [ 2.268307] mmcblk0: mmc0:5048 SD16G 14.4 GiB
[ KERNEL] [ 2.272164] random: fast init done
[ KERNEL] [ 2.279785] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 2.290750] mmcblk0: p1
[ KERNEL] [ 2.342645] Indeed it is in host mode hprt0 = 00021501
[ KERNEL] [ 2.552532] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ KERNEL] [ 2.552643] Indeed it is in host mode hprt0 = 00001101
[ pfac] [ 2.595057] Run /sbin/initrd.
[ pfac] [ 2.595232] Ok, PID 648.
[ initrd] [ 2.599662] WTware 6.0.6/RPi shell.
[ initrd] [ 2.600281] Load font 'ter-c32b.psf', console 120x33.
[ initrd] [ 2.627309] HDD/MMC/SD boot.
[ initrd] [ 2.627467] No device '/dev/fb1'.
[ initrd] [ 2.692783] Success: /dev/mmcblk0p1 mounted to /bootmedia.
/--- FILE "/bootmedia/config.txt" -----------------------
| # For more options and information see:
| #
| # https://www.raspberrypi.org/documentation/configuration/config-txt/README.md
| #
| # Some settings may impact device functionality. See link above for details.
| # Uncomment if you get no picture on HDMI for a default "safe" mode.
| #hdmi_safe=1
| # Uncomment this if your display has a black border of unused pixels visible
| # and your display can output without overscan.
| disable_overscan=1
| # Uncomment if hdmi display is not detected and composite is being output.
| #hdmi_force_hotplug=1
| # Uncomment to force a specific HDMI mode (this will force VGA).
| #hdmi_group=1
| #hdmi_mode=1
| # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
| #hdmi_drive=2
| # Uncomment to increase signal to HDMI, if you have interference, blanking, or
| # no display.
| #config_hdmi_boost=4
| # Uncomment to overclock the arm. 700 MHz is the default.
| #arm_freq=800
| disable_splash=1
| framebuffer_depth=32
| # Uncomment for 16-bit color.
| #framebuffer_depth=16
| # Enable onboard audio (HDMI or jack).
| dtparam=audio=on
| # Removes the warning overlay.
| #avoid_warnings=1
| # Additionally allows turbo when low-voltage is present.
| #avoid_warnings=2
| [pi4]
| max_framebuffers=2
| [all]
| # Uncomment these two lines to set display resolution:
| #hdmi_group=2
| #hdmi_mode=58
| #
| # Specify correct value in hdmi_mode= line from the list of valid values:
| # 800x600: hdmi_mode=9
| # 1024x768: hdmi_mode=16
| # 1280x1024: hdmi_mode=35
| # 1360x768: hdmi_mode=39
| # 1400x1050: hdmi_mode=42
| # 1440x900: hdmi_mode=47
| # 1600x1200: hdmi_mode=51
| # 1680x1050: hdmi_mode=58
| # 1366x768: hdmi_mode=81
| # 1920x1080: hdmi_mode=82
| # 1920x1200: hdmi_mode=69
| #
| # Find more resolutions in manual:
| # https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
| #
| # Uncomment six lines with such syntax and right hdmi_mode= values for
| # dual displays on Raspberry Pi 4:
| #
| #[HDMI:0]
| # hdmi_group=2
| # hdmi_mode=42
| #[HDMI:1]
| # hdmi_group=2
| # hdmi_mode=58
\----------------------------------------------------
[ KERNEL] [ 2.792814] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ KERNEL] [ 2.792825] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 2.793464] hub 1-1:1.0: USB hub found
[ KERNEL] [ 2.793577] hub 1-1:1.0: 4 ports detected
[ KERNEL] [ 3.112535] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ KERNEL] [ 3.242751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ KERNEL] [ 3.242762] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.243390] hub 1-1.1:1.0: USB hub found
[ KERNEL] [ 3.243495] hub 1-1.1:1.0: 3 ports detected
[ KERNEL] [ 3.342534] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ KERNEL] [ 3.489522] usb 1-1.3: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 3.30
[ KERNEL] [ 3.489533] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 3.489541] usb 1-1.3: Product: USB Keyboard
[ KERNEL] [ 3.489549] usb 1-1.3: Manufacturer: SIGMACHIP
[ KERNEL] [ 3.500925] input: SIGMACHIP USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1C4F:0002.0001/input/input0
[ KERNEL] [ 3.563561] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-3f980000.usb-1.3/input0
[ KERNEL] [ 3.573035] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0002.0002/input/input1
[ KERNEL] [ 3.573107] usb 1-1.1.3: new full-speed USB device number 5 using dwc_otg
[ KERNEL] [ 3.643303] input: SIGMACHIP USB Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0002.0002/input/input2
[ KERNEL] [ 3.643722] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-3f980000.usb-1.3/input1
[ KERNEL] [ 3.719530] usb 1-1.1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01
[ KERNEL] [ 3.719546] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 3.719554] usb 1-1.1.3: Product: USB Receiver
[ KERNEL] [ 3.719561] usb 1-1.1.3: Manufacturer: Logitech
[ KERNEL] [ 3.748623] logitech-djreceiver 0003:046D:C52B.0005: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.1.3/input2
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| [BOM]
| clientIP=217.144.167.241
| config=local
| netmedia=ethernet
| netmask=255.255.248.0
| routerIP=217.144.160.1
| nameserverIP=195.208.46.100
\----------------------------------------------------
[ initrd] [ 3.863460] Do not cache package files.
[ initrd] [ 3.863647] WTpassword empty.
[ initrd] [ 3.863725] Unpack /bootmedia/packages/pi2-lib.
[ KERNEL] [ 3.909318] input: Logitech M215 2nd Gen as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.2/0003:046D:C52B.0005/0003:046D:401B.0006/input/input3
[ KERNEL] [ 3.909562] logitech-hidpp-device 0003:046D:401B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-3f980000.usb-1.1.3:1
[ KERNEL] [ 3.922408] input: Logitech K330 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.2/0003:046D:C52B.0005/0003:046D:4016.0007/input/input4
[ KERNEL] [ 3.923259] logitech-hidpp-device 0003:046D:4016.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K330] on usb-3f980000.usb-1.1.3:2
[ KERNEL] [ 4.222557] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg
[ KERNEL] [ 4.372828] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ KERNEL] [ 4.372836] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ initrd] [ 4.685813] USB: 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory.
[ initrd] [ 4.685910] USB: 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub.
[ initrd] [ 4.685945] USB: 046d:c52b Logitech, Inc. Unifying Receiver.
[ initrd] [ 4.685977] USB: 0424:7800 Microchip Technology, Inc. (formerly SMSC).
[ initrd] [ 5.895677] Load Ethernet drivers.
[ initrd] [ 5.895723] modprobe lan78xx.
[ KERNEL] [ 6.036839] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ KERNEL] [ 6.037311] libphy: lan78xx-mdiobus: probed
[ KERNEL] [ 6.042001] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[ initrd] [ 6.183618] modprobe smsc95xx.
[ KERNEL] [ 6.184867] usbcore: registered new interface driver lan78xx
[ KERNEL] [ 6.200361] usbcore: registered new interface driver smsc95xx
[ KERNEL] [ 7.237295] random: crng init done
[ initrd] [ 8.303840] WTpassword empty.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ pfac] [ 8.306527] Run /sbin/httpd.
[ initrd] [ 8.306611] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 8.306721] Ok, PID 746.
[ initrd] [ 8.306769] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[ initrd] [ 8.306846] /bootmedia/configs/config.wtc -> /tmp/config.wtc, 146 bytes copied.
[ initrd] [ 8.306929] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| server=rdp.itcom.info:4000
| sound = on, amixer:cset numid=3 1
| connection
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=rdp.itcom.info:4000
| sound=on, amixer:cset numid=3 1
| connection
\----------------------------------------------------
[ initrd] [ 8.308346] Hostname: "wtwB827EB7A6B3A".
[ initrd] [ 8.308446] [NTP] 42 DHCP option is not set.
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 8.317917] Internal HTTP Server, WTware 6.0.6/RPi
[ httpd] [ 8.323970] Reread settings.
[ initrd] [ 8.324123] Unpack /bootmedia/packages/pi2-f.
[ httpd] [ 8.324173] Everyone can control terminal by HTTP.
[ gm] [ 8.538064] WTware 6.0.6/RPi session manager.
[ gm] [ 8.538591] Add keyboard event4: Logitech K330.
[ gm] [ 8.538633] EV_REL flag found. Add mouse event3: Logitech M215 2nd Gen.
[ gm] [ 8.538667] Add keyboard event2: SIGMACHIP USB Keyboard System Control.
[ gm] [ 8.538701] Add keyboard event1: SIGMACHIP USB Keyboard Consumer Control.
[ gm] [ 8.538734] Add keyboard event0: SIGMACHIP USB Keyboard.
[ gm] [ 8.538798] Display mode: 1920x1080, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 9.008260] Framebuffer device found.
[ gm] [ 9.008345] LINELENBYTES 7680
[ gm] [ 9.008382] VLEN 8294400
[ gm] [ 9.009924] Use /lib/ui32.so.
[ gm] [ 9.035802] Unpack /bootmedia/packages/pi2-alsa.
[ gm] [ 9.209356] modprobe snd-bcm2835.
[ KERNEL] [ 9.220028] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ gm] [ 9.223257] modprobe snd-usb-audio.
[ KERNEL] [ 9.224727] bcm2835_audio soc:audio: card created with 8 channels
/--- FILE "/proc/asound/devices" -----------------------
| 0: [ 0] : control
| 16: [ 0- 0]: digital audio playback
| 17: [ 0- 1]: digital audio playback
| 18: [ 0- 2]: digital audio playback
| 33: : timer
\----------------------------------------------------
[ KERNEL] [ 9.236056] usbcore: registered new interface driver snd-usb-audio
[ gm] [ 9.234858] /dev/snd//controlC0 character device.
[ gm] [ 9.234908] /dev/snd//pcmC0D2p character device.
[ gm] [ 9.234964] /dev/snd//pcmC0D1p character device.
[ gm] [ 9.235016] /dev/snd//pcmC0D0p character device.
[ gm] [ 9.235067] /dev/snd//timer character device.
[ gm] [ 9.235111] +--- Executing "/usr/bin/amixer cset numid=3 1"
[ gm] [ 9.242109] +- Errorlevel: 0, output:
| numid=3,iface=MIXER,name='PCM Playback Route'
| ; type=INTEGER,access=rw------,values=1,min=0,max=3,step=0
| : values=1
[ gm] [ 9.242323] +------------------------
[ gm] [ 9.242357] Run '/sbin/rdpsnd sndvol 100 100 50', log '', env '', pid ''.
[ pfac] [ 9.242772] Run /sbin/rdpsnd sndvol 100 100 50.
[ gm] [ 9.242811] Run sound daemon.
[ pfac] [ 9.242850] Ok, PID 769.
[ gm] [ 9.242871] Run '/sbin/rdpsnd 1 0 100 0 -1', log '', env '', pid ''.
[ pfac] [ 9.242904] Run /sbin/rdpsnd 1 0 100 0 -1.
[ pfac] [ 9.242937] Ok, PID 770.
[ rdpsnd] [ 9.245867] RDP Sound Redirector, WTware 6.0.6/RPi.
[ sndvol] [ 9.248928] Card 'ALSA'/'bcm2835 ALSA'.
[ sndvol] [ 9.249008] Mixer name: 'Broadcom Mixer'.
[ sndvol] [ 9.249048] Components: ''.
[ sndvol] [ 9.249083] Controls: 5.
[ sndvol] [ 9.249118] ALSA: control 'PCM Playback Volume'.
[ sndvol] [ 9.249152] ALSA: control 'PCM Playback Switch'.
[ sndvol] [ 9.249187] ALSA: control 'PCM Playback Route'.
[ sndvol] [ 9.249221] ALSA: control 'IEC958 Playback Default'.
[ sndvol] [ 9.249255] ALSA: control 'IEC958 Playback Con Mask'.
[ pfac] [ 9.249975] Process pid 769 terminated, status 00000000.
[ gm] [ 9.309161] Run '/sbin/resolver 0xcbfdd8 dns [rdp.itcom.info]', log '', env '', pid ''.
[ gm] [ 9.309307] Nobody can control terminal by VNC.
[ gm] [ 9.309388] Nobody can control terminal by WTRC.
[ pfac] [ 9.309995] Run /sbin/resolver 0xcbfdd8 dns [rdp.itcom.info].
[ pfac] [ 9.310242] Ok, PID 771.
[ resolver fdd8] [ 19.326441] Lookup for "rdp.itcom.info" failed, errors 11 -3.
[ gm] [ 19.326584] Failed to resolve rdp.itcom.info.
[ gm] [ 19.326712] Final message: Не могу преобразовать rdp.itcom.info в IP-адрес.
Возможно, не работает или не указан сервер DNS.
[ pfac] [ 19.327241] Process pid 771 terminated, status 00000000.
[ httpd] [ 6377.860089] Bad header character 0x26.
[ httpd] [13230.823227] httpd.cpp ( 204): -- ERROR -- Bad request from 66.132.153.51: 'PRI * HTTP/2.0'.
[ httpd] [13241.519496] httpd.cpp ( 204): -- ERROR -- Bad request from 66.132.153.51: 'PRI * HTTP/2.0'.
[ httpd] [14629.413981] httpd.cpp ( 204): -- ERROR -- Bad request from 66.132.153.54: 'PRI * HTTP/2.0'.
[ httpd] [14632.771975] httpd.cpp ( 204): -- ERROR -- Bad request from 66.132.153.54: 'PRI * HTTP/2.0'.
[ httpd] [14636.147708] Bad header character 0x16.
[ httpd] [15027.226017] httpd.cpp ( 204): -- ERROR -- Bad request from 149.50.96.5: 'PUT /SDK/webLanguage HTTP/1.1'.
[ httpd] [18511.114422] Bad header character 0x16.
[ httpd] [18512.346318] Bad header character 0x16.
[ httpd] [18513.620565] Bad header character 0x16.
[ httpd] [18513.896239] Bad header character 0x0a.
[ httpd] [20796.320116] Bad header character 0x16.
[ httpd] [20796.526176] Bad header character 0x16.
[ httpd] [21306.502953] Bad header character 0x16.
[ httpd] [21308.556166] httpd.cpp ( 204): -- ERROR -- Bad request from 3.143.33.63: 'SSH-2.0-Go'.
[ httpd] [21310.371462] Bad header character 0x16.
[ httpd] [21383.310555] Bad header character 0x0a.
[ httpd] [24212.551964] Bad header character 0x16.
[ httpd] [24645.259581] Bad header character 0x16.
[ httpd] [25398.578653] Bad header character 0x16.
[ httpd] [25886.421444] Bad header character 0x16.
[ httpd] [26487.425679] Bad header character 0x16.
[ httpd] [26613.529842] Bad header character 0x16.
[ httpd] [27122.276167] Bad header character 0x16.
[ httpd] [28685.481735] httpd.cpp ( 204): -- ERROR -- Bad request from 204.76.203.208: 'PROPFIND / HTTP/1.1'.
[ KERNEL] [35432.837322] logitech-hidpp-device 0003:046D:401B.0006: HID++ 2.0 device connected.
[ gm] [35433.970140] Run '/sbin/resolver 0xcbfdd8 dns [rdp.itcom.info]', log '', env '', pid ''.
[ pfac] [35433.970372] Run /sbin/resolver 0xcbfdd8 dns [rdp.itcom.info].
[ pfac] [35433.970866] Ok, PID 2202.
[ pfac] [35433.980857] Process pid 2202 terminated, status 00000000.
[ gm] [35433.982079] rdp.itcom.info => 164.215.68.46.
[ gm] [35433.987364] Free ram before fork terminal client /sbin/rdpclient (session 1): 916516 Kb.
[ gm] [35433.987423] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [35433.987464] Run /sbin/rdpclient 1.
[ pfac] [35433.987641] Ok, PID 2203.
[rdpclient 2203] [35433.994908] RDP Terminal Client, WTware 6.0.6/RPi, pipe 1, pid 2203.
[rdpclient 2203] [35433.995138] Use /lib/ui32.so.
[rdpclient 2203] [35433.995848] Redirect sound.
[rdpclient 2203] [35433.996123] Make RDP session with 164.215.68.46, port 4000.
[rdpclient 2203] [35433.996179] No username.
[rdpclient 2203] [35433.996229] No password.
[rdpclient 2203] [35433.996268] No PIN.
[rdpclient 2203] [35433.996306] No domain.
[rdpclient 2203] [35433.996340] No shell.
[rdpclient 2203] [35433.996379] No directory.
[rdpclient 2203] [35433.996414] Window: 1856x1080@24.
[rdpclient 2203] [35433.996597] PFlags 0x0000002F.
[rdpclient 2203] [35433.996671] Keyboard 00000409:00000000.
[rdpclient 2203] [35433.996707] My hostname "wtwB827EB7A6B3A".
[rdpclient 2203] [35433.996768] TCP: connecting to 164.215.68.46:4000.
[rdpclient 2203] [35433.997722] TCP: connection with 164.215.68.46:4000 established.
[rdpclient 2203] [35433.997881] Turn keepalive on.
[rdpclient 2203] [35433.998656] Free ram after buffers allocation: 915776 KB.
[rdpclient 2203] [35443.480191] Reconnect with NLA enabled.
[rdpclient 2203] [35443.480766] TCP: reconnecting to 164.215.68.46:4000.
[rdpclient 2203] [35443.481811] TCP: connection with 164.215.68.46:4000 established.
[rdpclient 2203] [35443.482086] Turn keepalive on.
[rdpclient 2203] [35443.490885] Server supports GFX Pipeline.
[rdpclient 2203] [35443.491058] NLA.
[rdpclient 2203] [35443.491167] SSL/TLS.
[rdpclient 2203] [35443.546461] Enable font smoothing and Desktop Composition.
[rdpclient 2203] [35443.549525] RDP5 encryption (X.509).
[rdpclient 2203] [35443.747181] GFX codec.
[rdpclient 2203] [35443.781265] Graphics output buffer 1856x1080, 1 monitors.
[rdpclient 2203] [35443.781478] Monitor 0: 0.0-1855.1079 primary.
[rdpclient 2203] [35444.404103] LOGON_EX_LOGONERRORS: ErrorNotificationType 0xfffffffe, ErrorNotificationData 0x0000012c.
[rdpclient 2203] [35445.268827] SessionId 0x0000012c: INTELCOM\Sales11.
[rdpclient 2203] [35445.432162] Run 4 tile threads.
[rdpclient 2203] [35514.383132] Sound version: 8.
[rdpclient 2203] [35514.383417] ADPCM sound compression.
[rdpclient 2203] [35514.383548] Sound redirection: 44100 frames per second.
[ rdpsnd] [35514.677109] ALSA: use device hw:0,0.
[ rdpsnd] [35514.677955] ALSA: Hardware rate 44100Hz.
[ rdpsnd] [35514.678247] ALSA: chunk size 512 frames, 1024 bytes, 11 msec.
[ rdpsnd] [35514.678322] ALSA: buffer size 131072 bytes, 1486 miliseconds.
[ httpd] [39326.865102] Bad header character 0x16.
[ httpd] [39974.923820] Bad header character 0x25.
rshd.cpp ( 27): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
rshd.cpp ( 51): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
rshd.cpp ( 27): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[ httpd] [45499.597562] Bad header character 0x16.
[ httpd] [45499.807236] Bad header character 0x16.
[ httpd] [45500.019033] Bad header character 0x16.
[ httpd] [45989.229209] httpd.cpp ( 204): -- ERROR -- Bad request from 87.121.84.130: 'PUT /SDK/webLanguage HTTP/1.1'.
rshd.cpp ( 51): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
rshd.cpp ( 27): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[ httpd] [48690.313916] Bad header character 0x25.
[ httpd] [49365.044842] httpd.cpp ( 204): -- ERROR -- Bad request from 138.68.90.21: 'OPTIONS / HTTP/1.0'.
[ httpd] [49365.491977] Bad header character 0x25.
[ httpd] [49365.912059] Bad header character 0x00.
[ httpd] [49366.352383] httpd.cpp ( 204): -- ERROR -- Bad request from 138.68.90.21: ''.
[ httpd] [49366.796459] httpd.cpp ( 204): -- ERROR -- Bad request from 138.68.90.21: 'OPTIONS / RTSP/1.0'.
[ httpd] [49367.243555] Bad header character 0x80.
[ httpd] [49367.654088] Bad header character 0x00.
[ httpd] [49368.092790] Bad header character 0x00.
[ httpd] [49368.504593] httpd.cpp ( 204): -- ERROR -- Bad request from 138.68.90.21: 'HELP'.
[ httpd] [49368.933733] Bad header character 0x16.
[ httpd] [49369.357409] Bad header character 0x03.
[ httpd] [49369.784717] Bad header character 0x16.
[ httpd] [49370.182925] Bad header character 0x00.
[ httpd] [49370.586994] Bad header character 0x00.
[ httpd] [49371.020525] Bad header character 0x00.
[ httpd] [49371.451689] Bad header character 0x01.
[ httpd] [49371.890168] Bad header character 0x84.
[ httpd] [49372.315459] Bad header character 0x0c.
[ httpd] [49372.732006] httpd.cpp ( 204): -- ERROR -- Bad request from 138.68.90.21: 'OPTIONS sip:nm SIP/2.0'.
[ httpd] [49373.202418] Bad header character 0x04.
[ httpd] [49373.671734] Bad header character 0x03.
[ httpd] [49374.109340] Bad header character 0x00.
[ httpd] [49374.555822] Bad header character 0x00.
[ httpd] [49374.998961] Bad header character 0x00.
[ httpd] [49375.419977] Bad header character 0x01.
[ httpd] [49375.848592] Bad header character 0x00.
[ httpd] [49376.271896] Bad header character 0x12.
[ httpd] [49376.675375] Bad header character 0x00.
[ httpd] [49377.112326] Bad header character 0x01.
Home
WTware diskless client.